Blue Yeti USB Microphone

15,00

Category:
Microphone
Form Factor Desktop / Stand/Boom Mount
Sound Field Mono, Stereo
Diaphragm 0.55″ / 14 mm
Polar Pattern Cardioid, Figure-8, Omnidirectional
Pattern Selection Switched
High-Pass Filter Yes
On-Board Controls Headphone Volume
Performance
Frequency Range 20 Hz to 20 kHz
Maximum SPL 120 dB SPL
THD 0.5%
Connectivity
Output Connectors (Digital) 1 x USB (Type Unspecified)
Headphone Connector 1 x 1/8″ / 3.5 mm
Wireless Connectivity None
Digital Audio
A/D Conversion 16-Bit
Sample Rate 48 kHz
Digital Signal Processing None
Operating System Support Windows, macOS/OS X
RAM Requirement 64 MB Minimum
Available Port USB (Interface Unspecified)

Employing a tri-capsule design that provides you with a variety of selectable polar patterns for flexibility in recording, the silver Yeti USB Microphone from Blue is capable of capturing your audio in up to 16-bit/48 kHz resolution. Depending on your sound source, you can select between stereo, cardioid, omnidirectional, or bi-directional polar patterns for optimal results.

The mic has an integrated headphone amp with an independent gain control for latency-free monitoring. Microphone gain control as well as an instant mute function are available right on the device itself, while the included stand allows for pivoting in a variety of angles for ideal placement, with the added functionality of folding the mic down for storage and transport. The Yeti is Mac and Windows compatible, and includes a USB cable.

Recording Control

Yeti features controls for headphone volume, pattern selection, instant mute and microphone gain—putting you in charge of every level of the recording process. If you’re experiencing distortion or feedback while recording an especially loud source, simply adjust the microphone’s sensitivity with the gain control. Or, if you want to take a break in the middle of a podcast, use the instant mute button.

The microphone comes equipped with a 3.5mm headphone jack and allows you to listen to what you’re recording in real-time, without latency delay. That means no more hearing a note 3 seconds after you played it. You can adjust the volume of your headphones using the control on the front of the microphone

Designed for Simplified Recording

Yeti doesn’t mind getting pushed around, it lets you adjust and pivot the microphone in relation to the sound source. Once you’ve achieved the desired angle, simply hand-tighten the set knobs to secure it in place. Yeti is a side-address microphone, so you can capture the best sound by going face-to-face with it. The microphone can also be folded down for portability, or removed completely from its base for mounting directly on a mic stand

Streamlined Setup

Simply plug Yeti into your computer’s USB port with the included USB cable, calibrate it with your operating system, and you’re ready to record. Yeti offers driver-free operation
Tri-capsule array with 3 condenser elements
Multiple pattern selection: cardioid, bi-directional, omnidirectional & stereo
Gain control, mute button, zero-latency headphone output
Unique, positionable design